Waterproof Case for iPhone SE 6S Plus 13 14 15 Pro Max Built-in Screen Protector

Waterproof Case For iPhone SE 5S 6S Plus 13 14 Pro Max Built-in Screen Protector Product Features and Function Description 1. Suitable for iPhone series phones 2. The product has a simple and round appearance. The front shell material is a combination of hard and soft glue, the outer grip is soft glue, and there are grooves for anti slip design. The rear shell has a frosted semi transparent effect 3. The protective shell has waterproof, anti drop, and dustproof functions, with a protection level of IP68, which means that the water depth is 1.5m, and the duration of protection is 30 minutes 4. Can accommodate universal mobile phones with or without tempered film, except for tempered film thickness exceeding 0.5mm Installation method and instructions 1. Before use, a waterproof test is required: close the front and rear covers of the phone, place the water in the sink, and press a glass water cup at the bottom. After half an hour, confirm that there is no water leakage before installing the phone 2. Tear off the white film inside the front cover of the phone case 3. Wipe the phone screen clean with a dustproof cloth 4. Tilt the mute button on one side of the phone into the front case (to guide the mute button into the transmission slot) and fully press the phone into the slot 5. Close the rear shell and check if all four edges are securely fastened 6. Open the charging port rubber plug, press the phone screen film flat with your hand, exhaust the air between the film and the screen, and then cover the rubber plug 7. Check the function response of the buttons and the pull button. If the function is normal, the installation is completed. Otherwise, repeat the steps after step 3 Material: PC+TPU Packaging includes and specifications 1. Front and rear covers of mobile phones 2. Instructions 3. Shell opener 4. Dustproof cloth 5. Lanyard